Vector Informatik
Dominant automotive embedded tools and AUTOSAR standards vendor from Germany
Founded 1988 | Stuttgart, Germany | 1,001–5,000 employees
rtos-developmentfirmware-developmentembedded-consultingcybersecurity
What is Vector Informatik?
Founded in 1988 in Stuttgart, Germany, Vector Informatik built its position as a primary commercial contributor to AUTOSAR, the automotive software architecture standard. The wider Vector Group employs roughly 4,000 people internationally. For an RFP evaluator, the critical scoping question is whether your requirement calls for AUTOSAR-standard ECU tooling and engineering services (Vector's actual offering — licensing plus services) or ground-up custom firmware outside that ecosystem (a scope Vector is a weaker fit for). Getting this distinction right in your RFP's technical requirements section will determine whether Vector's response is even comparable to project-based custom-development bids.
Vector Informatik works primarily with clients in Automotive sectors. Its primary differentiator is: Primary commercial contributor to the AUTOSAR standard, offering licensing-plus-services pricing rather than pure custom-development labor.
Vector Informatik tech stack and services
AUTOSARCAN busC/C++ECU diagnostics toolingEmbedded Linux
| Service area |
|---|
| RTOS Development |
| Firmware Development |
| Embedded Consulting |
| Cybersecurity |
Vector Informatik pricing
Short answer: Vector Informatik uses a tooling licenses, engineering services, consulting pricing approach. Minimum engagement is not publicly disclosed; a discovery call is required.
| Engagement model | Typical range | Best for |
|---|---|---|
| Tooling/licensing | Variable; depends on team size | Large programmes or team augmentation |
| Engineering services | Variable; depends on team size | Large programmes or team augmentation |
| Consulting | Variable; depends on team size | Large programmes or team augmentation |
Vector Informatik does not publish a public rate card. Contact them directly via their website to get project-specific pricing.
Vector Informatik pros and cons
| Advantages | Things to consider |
|---|---|
| +Primary commercial contributor to the AUTOSAR standard — direct standards influence an RFP evaluator can independently verify | -Licensing-plus-services pricing structure doesn't compare directly to pure custom-development labor-hour bids — clarify scope before comparing quotes |
| +35+ year focus specifically on automotive embedded tooling and ECU development supports strong reference-checking | -Automotive-only track record means zero transferable relevance for medical, industrial, or consumer procurement categories |
| +International presence across 10+ countries supports globally distributed procurement programs | -No published pricing — tooling licenses and services are quoted per engagement, extending RFI timelines |
Vector Informatik vs alternatives
How Vector Informatik compares to the other top Embedded Development service providers.
| Company | Best for | Key difference | Rating | Compare |
|---|---|---|---|---|
| Lemberg Solutions | RFPs needing hardware, firmware, and cloud scope under... | Offers all three standard engagement models (consulting, staff aug, end-to-end delivery) under one ISO-certified quality system spanning electrical through cloud | 4.8 | Full comparison |
| DornerWorks | Aerospace/defense RFPs needing ITAR-clean FPGA and hypervisor scope. | US-incorporated aerospace/defense specialist with FPGA and Xen hypervisor scope, simplifying ITAR and export-control compliance documentation | 4.6 | Full comparison |
| SYSGO | Safety-critical RFPs requiring SIL 4-certified platform licensing. | Licensing-plus-services pricing structure around a SIL 4-certified RTOS/hypervisor, backed by Thales Group's long-term financial stability | 4.5 | Full comparison |
| Bosch Engineering | RFPs valuing Bosch-grade quality documentation and component sourcing. | Wholly-owned Bosch Group subsidiary offering embedded-to-cloud service scope with manufacturing-grade quality documentation and direct component access | 4.5 | Full comparison |
| Promwad | RFPs wanting hardware design through manufacturing handoff in... | End-to-end European design house covering PCB, FPGA, embedded Linux, and manufacturing coordination in a single procurement scope | 4.4 | Full comparison |
| ByteSnap Design | RFPs requiring ISO 9001 certification and design-rescue capability. | ISO 9001:2015-certified UK boutique with a distinct design-rescue service category and named multi-vendor semiconductor partnerships | 4.4 | Full comparison |
| Elektrobit | Automotive RFPs needing production-scale AUTOSAR/ECU vendor references. | Software running in 600M+ vehicles gives RFP evaluators an independently verifiable production-scale reference, backed by Continental's Tier 1 relationships | 4.3 | Full comparison |
| Witekio | RFPs wanting chip-to-cloud scope consolidated into one lot. | Covers the full chip-to-cloud stack — BSP, firmware, connectivity, security, and application layer — as a single procurement scope | 4.3 | Full comparison |
| Klika Tech | RFPs requiring AWS Premier Partner status for edge-to-cloud... | AWS Premier Partner status specifically for edge-to-cloud IoT integration, a checkable qualification tier distinct from a generic cloud-partner claim | 4.3 | Full comparison |
| Softeq Development | RFPs wanting hardware, firmware, and app layers in... | Full-stack US firm covering PCB-to-device hardware, low-level firmware, and consumer application software under a single contract | 4.2 | Full comparison |
| Data Respons | Nordic RFPs needing embedded scope across multiple regulated... | Nordic embedded specialist spanning eight regulated sectors over nearly 40 years, now backed by Akkodis scale after two ownership transitions | 4.2 | Full comparison |
| eInfochips | RFPs needing embedded engineering bundled with component sourcing. | Arrow Electronics-owned engineering firm offering direct component-sourcing access alongside embedded engineering scope | 4.1 | Full comparison |
| KPIT Technologies | Large automotive RFPs requiring publicly-audited vendor financials. | Publicly-listed automotive embedded firm with audited financial disclosures and a named Renault Group strategic partnership | 4.1 | Full comparison |
| DMC, Inc. | RFPs bundling embedded controllers with factory automation systems. | Combines embedded systems engineering with manufacturing and test automation under one US-based vendor, avoiding a split-vendor integration gap | 4.1 | Full comparison |
| Tata Elxsi | Large enterprises RFPing automotive embedded work alongside media/healthcare... | Broad ER&D scale spanning automotive, media/telecom, and healthcare over 35+ years, under the Tata Group umbrella | 4.0 | Full comparison |
| Cyient | Aerospace/defense RFPs needing avionics engineering at scale. | Aerospace-focused embedded avionics practice (fly-by-wire, autopilot, collision avoidance) strengthened by the CERTON Software acquisition | 4.0 | Full comparison |
| GlobalLogic | RFPs wanting embedded scope inside a Hitachi-backed digital... | Hitachi Group-owned digital engineering scale with silicon and embedded hardware/software solutions plus a named Elektrobit automotive partnership | 3.9 | Full comparison |
| Wind River | RFPs requiring a certified commercial RTOS with production... | Maker of VxWorks, a certified RTOS deployed in commercial and military aircraft, now majority-owned by automotive Tier 1 supplier Aptiv | 3.9 | Full comparison |
| Luxoft | Automotive RFPs needing infotainment/digital cockpit scope at DXC... | Automotive software systems integrator with software in 50M+ vehicles, partnering with 8 of the 10 largest vehicle manufacturers, now under DXC Technology | 3.9 | Full comparison |
| Intellias | Automotive RFPs wanting proven multi-brand navigation deployment experience. | Named production deployment: navigation technology used across 10+ global car brands and 10M+ vehicles, inside a broader IT outsourcing portfolio | 3.8 | Full comparison |
| QuEST Global | Multi-vertical RFPs needing embedded engineering alongside broader R&D. | Very broad engineering-services scale (90+ delivery centers, 18+ countries) offering end-to-end silicon and embedded engineering directly to chipmakers | 3.8 | Full comparison |
| Avenga | RFPs wanting IoT engineering inside a broad digital... | Broad software, data, and IoT portfolio backed by scale from consolidating multiple acquired firms since 2017 | 3.7 | Full comparison |
| Capgemini Engineering | Global RFPs needing embedded work inside a broad... | One of the largest global engineering consultancies by headcount, with embedded/electronics as one of many technical domains covered | 3.7 | Full comparison |
| LTTS | Large RFPs needing embedded engineering with public-company governance. | Publicly-listed engineering R&D scale (23,800+ engineers) backed by the L&T Group, spanning embedded, automotive, and industrial IoT | 3.7 | Full comparison |
| HCLTech | Global RFPs wanting embedded engineering as part of... | Embedded engineering delivered by the Engineering & R&D Services business unit inside one of the world's largest IT services companies | 3.6 | Full comparison |
Vector Informatik FAQ
What is Vector Informatik?
Dominant automotive embedded tools and AUTOSAR standards vendor from Germany
How much does Vector Informatik charge?
Vector Informatik uses tooling licenses, engineering services, consulting pricing. Minimum engagement is not publicly disclosed. A discovery call is required to get project-specific quotes.
What tech stack does Vector Informatik use?
Vector Informatik works with AUTOSAR, CAN bus, C/C++, ECU diagnostics tooling, Embedded Linux. Primary industries served include Automotive.
Is Vector Informatik right for enterprise?
RFPs specifying AUTOSAR-standard ECU tooling and engineering. 1,001–5,000 team size. Key consideration: Licensing-plus-services pricing structure doesn't compare directly to pure custom-development labor-hour bids — clarify scope before comparing quotes.
What are the best Vector Informatik alternatives?
The best alternatives to Vector Informatik depend on your use case. Top options are:
- Lemberg Solutions: offers all three standard engagement models (consulting, staff aug, end-to-end delivery) under one iso-certified quality system spanning electrical through cloud
- DornerWorks: us-incorporated aerospace/defense specialist with fpga and xen hypervisor scope, simplifying itar and export-control compliance documentation
- SYSGO: licensing-plus-services pricing structure around a sil 4-certified rtos/hypervisor, backed by thales group's long-term financial stability
Compare Vector Informatik with other Embedded Development service providers
Vector Informatik vs Lemberg Solutions Vector Informatik vs DornerWorks Vector Informatik vs SYSGO Vector Informatik vs Bosch Engineering Vector Informatik vs Promwad Vector Informatik vs ByteSnap Design Vector Informatik vs Elektrobit Vector Informatik vs Witekio Vector Informatik vs Klika Tech Vector Informatik vs Softeq Development Vector Informatik vs Data Respons Vector Informatik vs eInfochips Vector Informatik vs KPIT Technologies Vector Informatik vs DMC, Inc. Vector Informatik vs Tata Elxsi Vector Informatik vs Cyient Vector Informatik vs GlobalLogic Vector Informatik vs Wind River Vector Informatik vs Luxoft Vector Informatik vs Intellias Vector Informatik vs QuEST Global Vector Informatik vs Avenga Vector Informatik vs Capgemini Engineering Vector Informatik vs LTTS Vector Informatik vs HCLTech
Verify all details directly with Vector Informatik before making a decision.